Timing kit VAG - Porsche - Ford - 2.8 / 3.2 / 3.6 L V6 FSI

Timing chain timing kit for VAG / Porsche / Ford - 2.8 / 3.2 / 3.6 L V6 petrol, FSI

To change the timing chain, which is on the gearbox side in specified engines.

Suitable for the following engine codes:

VAG / Ford: AMV, AUE, AYL, AYT, AZZ, BAA, BDB, BDE, BDL, BFH, BHE, BJS, BKJ, BKK, BKL, BMJ, BML, BMV, BMX, BRJ, BRK, BUB, CBRA

Porsche: M55.01 (Cayenne with 3.6L - item no. 115686 and 115324 are also needed for this)

Note: To loosen flywheel bolts (60 Nm + 90°), tighten ref. 112446 (to be used as T10069)

on the vibration damper. We also recommend replacing the shaft sealing ring on the crankshaft

- transmission side. For this you need the special tools ref. 117750, 117751 and 117752 (to be used as T10122).

For 3.2 and 3.6 L FSI engines it is necessary to fix the pinion of the vacuum pump.

For this you need tool 1 Timing tool VW Passat , Audi Q7 FSI 3.6L

Drive sprocket locking tool for VAG 3.6L FSI to be used as OEM T10332"

To fix the drive gear of the high pressure pump. Necessary

when adjusting the valve timing.

Suitable for VAG 3.6L 6 cylinder 4 valve engines, integrated in the

VW Passat (357) (3C2) (3C5) from 2006

VW Touareg (7L6) (7LA) from 2006

Audi Q7 (4LB) from 2007

+

Porsche Cayenne 3.6L with M55.01 engine without mechanical vacuum pump

engine codes: BLV, BHL, BHK

to be used as OEM T10332

The original comparison number(s) are used for identification only, this is not an original tool.